CVE-2023-53135 (GCVE-0-2023-53135)
Vulnerability from cvelistv5
Published
2025-05-02 15:56
Modified
2025-05-04 07:50
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved: riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode When CONFIG_FRAME_POINTER is unset, the stack unwinding function walk_stackframe randomly reads the stack and then, when KASAN is enabled, it can lead to the following backtrace: [ 0.000000] ================================================================== [ 0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a [ 0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0 [ 0.000000] [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43 [ 0.000000] Hardware name: riscv-virtio,qemu (DT) [ 0.000000] Call Trace: [ 0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a [ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36 [ 0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8 [ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8 [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a [ 0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84 [ 0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6 [ 0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76 [ 0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e [ 0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52 [ 0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84 [ 0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6 [ 0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20 [ 0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e [ 0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a [ 0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c [ 0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e [ 0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe [ 0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca [ 0.000000] [ 0.000000] The buggy address belongs to stack of task swapper/0 [ 0.000000] and is located at offset 0 in frame: [ 0.000000] stack_trace_save+0x0/0xa6 [ 0.000000] [ 0.000000] This frame has 1 object: [ 0.000000] [32, 56) 'c' [ 0.000000] [ 0.000000] The buggy address belongs to the physical page: [ 0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07 [ 0.000000] flags: 0x1000(reserved|zone=0) [ 0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000 [ 0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff [ 0.000000] page dumped because: kasan: bad access detected [ 0.000000] [ 0.000000] Memory state around the buggy address: [ 0.000000] ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3 [ 0.000000] ^ [ 0.000000] ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ================================================================== Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise mode.
Impacted products
Vendor Product Version
Linux Linux Version: 5d8544e2d0075a5f3c9a2cf27152354d54360da1
Version: 5d8544e2d0075a5f3c9a2cf27152354d54360da1
Version: 5d8544e2d0075a5f3c9a2cf27152354d54360da1
Version: 5d8544e2d0075a5f3c9a2cf27152354d54360da1
Version: 5d8544e2d0075a5f3c9a2cf27152354d54360da1
Version: 5d8544e2d0075a5f3c9a2cf27152354d54360da1
Create a notification for this product.
Show details on NVD website


{
  "containers": {
    "cna": {
      "affected": [
        {
          "defaultStatus": "unaffected",
          "product": "Linux",
          "programFiles": [
            "arch/riscv/kernel/stacktrace.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "lessThan": "a99a61d9e1bfca2fc37d223a6a185c0eb66aba02",
              "status": "affected",
              "version": "5d8544e2d0075a5f3c9a2cf27152354d54360da1",
              "versionType": "git"
            },
            {
              "lessThan": "3de277af481ab931fab9e295ad8762692920732a",
              "status": "affected",
              "version": "5d8544e2d0075a5f3c9a2cf27152354d54360da1",
              "versionType": "git"
            },
            {
              "lessThan": "3a9418d2c93c1c86ce4d0595112d91c7a8e70c2c",
              "status": "affected",
              "version": "5d8544e2d0075a5f3c9a2cf27152354d54360da1",
              "versionType": "git"
            },
            {
              "lessThan": "324912d6c0c4006711054d389faa2239c1655e1e",
              "status": "affected",
              "version": "5d8544e2d0075a5f3c9a2cf27152354d54360da1",
              "versionType": "git"
            },
            {
              "lessThan": "17fa90ffba20743c946920fbb0afe160d0ead8c9",
              "status": "affected",
              "version": "5d8544e2d0075a5f3c9a2cf27152354d54360da1",
              "versionType": "git"
            },
            {
              "lessThan": "76950340cf03b149412fe0d5f0810e52ac1df8cb",
              "status": "affected",
              "version": "5d8544e2d0075a5f3c9a2cf27152354d54360da1",
              "versionType": "git"
            }
          ]
        },
        {
          "defaultStatus": "affected",
          "product": "Linux",
          "programFiles": [
            "arch/riscv/kernel/stacktrace.c"
          ],
          "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git",
          "vendor": "Linux",
          "versions": [
            {
              "status": "affected",
              "version": "4.15"
            },
            {
              "lessThan": "4.15",
              "status": "unaffected",
              "version": "0",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.4.*",
              "status": "unaffected",
              "version": "5.4.237",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.10.*",
              "status": "unaffected",
              "version": "5.10.175",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "5.15.*",
              "status": "unaffected",
              "version": "5.15.103",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.1.*",
              "status": "unaffected",
              "version": "6.1.20",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "6.2.*",
              "status": "unaffected",
              "version": "6.2.7",
              "versionType": "semver"
            },
            {
              "lessThanOrEqual": "*",
              "status": "unaffected",
              "version": "6.3",
              "versionType": "original_commit_for_fix"
            }
          ]
        }
      ],
      "cpeApplicability": [
        {
          "nodes": [
            {
              "cpeMatch": [
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.4.237",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.10.175",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "5.15.103",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.1.20",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.2.7",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                },
                {
                  "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
                  "versionEndExcluding": "6.3",
                  "versionStartIncluding": "4.15",
                  "vulnerable": true
                }
              ],
              "negate": false,
              "operator": "OR"
            }
          ]
        }
      ],
      "descriptions": [
        {
          "lang": "en",
          "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nriscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode\n\nWhen CONFIG_FRAME_POINTER is unset, the stack unwinding function\nwalk_stackframe randomly reads the stack and then, when KASAN is enabled,\nit can lead to the following backtrace:\n\n[    0.000000] ==================================================================\n[    0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a\n[    0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0\n[    0.000000]\n[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43\n[    0.000000] Hardware name: riscv-virtio,qemu (DT)\n[    0.000000] Call Trace:\n[    0.000000] [\u003cffffffff80007ba8\u003e] walk_stackframe+0x0/0x11a\n[    0.000000] [\u003cffffffff80099ecc\u003e] init_param_lock+0x26/0x2a\n[    0.000000] [\u003cffffffff80007c4a\u003e] walk_stackframe+0xa2/0x11a\n[    0.000000] [\u003cffffffff80c49c80\u003e] dump_stack_lvl+0x22/0x36\n[    0.000000] [\u003cffffffff80c3783e\u003e] print_report+0x198/0x4a8\n[    0.000000] [\u003cffffffff80099ecc\u003e] init_param_lock+0x26/0x2a\n[    0.000000] [\u003cffffffff80007c4a\u003e] walk_stackframe+0xa2/0x11a\n[    0.000000] [\u003cffffffff8015f68a\u003e] kasan_report+0x9a/0xc8\n[    0.000000] [\u003cffffffff80007c4a\u003e] walk_stackframe+0xa2/0x11a\n[    0.000000] [\u003cffffffff80007c4a\u003e] walk_stackframe+0xa2/0x11a\n[    0.000000] [\u003cffffffff8006e99c\u003e] desc_make_final+0x80/0x84\n[    0.000000] [\u003cffffffff8009a04e\u003e] stack_trace_save+0x88/0xa6\n[    0.000000] [\u003cffffffff80099fc2\u003e] filter_irq_stacks+0x72/0x76\n[    0.000000] [\u003cffffffff8006b95e\u003e] devkmsg_read+0x32a/0x32e\n[    0.000000] [\u003cffffffff8015ec16\u003e] kasan_save_stack+0x28/0x52\n[    0.000000] [\u003cffffffff8006e998\u003e] desc_make_final+0x7c/0x84\n[    0.000000] [\u003cffffffff8009a04a\u003e] stack_trace_save+0x84/0xa6\n[    0.000000] [\u003cffffffff8015ec52\u003e] kasan_set_track+0x12/0x20\n[    0.000000] [\u003cffffffff8015f22e\u003e] __kasan_slab_alloc+0x58/0x5e\n[    0.000000] [\u003cffffffff8015e7ea\u003e] __kmem_cache_create+0x21e/0x39a\n[    0.000000] [\u003cffffffff80e133ac\u003e] create_boot_cache+0x70/0x9c\n[    0.000000] [\u003cffffffff80e17ab2\u003e] kmem_cache_init+0x6c/0x11e\n[    0.000000] [\u003cffffffff80e00fd6\u003e] mm_init+0xd8/0xfe\n[    0.000000] [\u003cffffffff80e011d8\u003e] start_kernel+0x190/0x3ca\n[    0.000000]\n[    0.000000] The buggy address belongs to stack of task swapper/0\n[    0.000000]  and is located at offset 0 in frame:\n[    0.000000]  stack_trace_save+0x0/0xa6\n[    0.000000]\n[    0.000000] This frame has 1 object:\n[    0.000000]  [32, 56) \u0027c\u0027\n[    0.000000]\n[    0.000000] The buggy address belongs to the physical page:\n[    0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07\n[    0.000000] flags: 0x1000(reserved|zone=0)\n[    0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000\n[    0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff\n[    0.000000] page dumped because: kasan: bad access detected\n[    0.000000]\n[    0.000000] Memory state around the buggy address:\n[    0.000000]  ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n[    0.000000]  ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n[    0.000000] \u003effffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3\n[    0.000000]                                            ^\n[    0.000000]  ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00\n[    0.000000]  ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\n[    0.000000] ==================================================================\n\nFix that by using READ_ONCE_NOCHECK when reading the stack in imprecise\nmode."
        }
      ],
      "providerMetadata": {
        "dateUpdated": "2025-05-04T07:50:39.371Z",
        "orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
        "shortName": "Linux"
      },
      "references": [
        {
          "url": "https://git.kernel.org/stable/c/a99a61d9e1bfca2fc37d223a6a185c0eb66aba02"
        },
        {
          "url": "https://git.kernel.org/stable/c/3de277af481ab931fab9e295ad8762692920732a"
        },
        {
          "url": "https://git.kernel.org/stable/c/3a9418d2c93c1c86ce4d0595112d91c7a8e70c2c"
        },
        {
          "url": "https://git.kernel.org/stable/c/324912d6c0c4006711054d389faa2239c1655e1e"
        },
        {
          "url": "https://git.kernel.org/stable/c/17fa90ffba20743c946920fbb0afe160d0ead8c9"
        },
        {
          "url": "https://git.kernel.org/stable/c/76950340cf03b149412fe0d5f0810e52ac1df8cb"
        }
      ],
      "title": "riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode",
      "x_generator": {
        "engine": "bippy-1.2.0"
      }
    }
  },
  "cveMetadata": {
    "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
    "assignerShortName": "Linux",
    "cveId": "CVE-2023-53135",
    "datePublished": "2025-05-02T15:56:08.287Z",
    "dateReserved": "2025-05-02T15:51:43.561Z",
    "dateUpdated": "2025-05-04T07:50:39.371Z",
    "state": "PUBLISHED"
  },
  "dataType": "CVE_RECORD",
  "dataVersion": "5.1",
  "vulnerability-lookup:meta": {
    "nvd": "{\"cve\":{\"id\":\"CVE-2023-53135\",\"sourceIdentifier\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\",\"published\":\"2025-05-02T16:15:32.447\",\"lastModified\":\"2025-05-05T20:54:19.760\",\"vulnStatus\":\"Awaiting Analysis\",\"cveTags\":[],\"descriptions\":[{\"lang\":\"en\",\"value\":\"In the Linux kernel, the following vulnerability has been resolved:\\n\\nriscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode\\n\\nWhen CONFIG_FRAME_POINTER is unset, the stack unwinding function\\nwalk_stackframe randomly reads the stack and then, when KASAN is enabled,\\nit can lead to the following backtrace:\\n\\n[    0.000000] ==================================================================\\n[    0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a\\n[    0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0\\n[    0.000000]\\n[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43\\n[    0.000000] Hardware name: riscv-virtio,qemu (DT)\\n[    0.000000] Call Trace:\\n[    0.000000] [\u003cffffffff80007ba8\u003e] walk_stackframe+0x0/0x11a\\n[    0.000000] [\u003cffffffff80099ecc\u003e] init_param_lock+0x26/0x2a\\n[    0.000000] [\u003cffffffff80007c4a\u003e] walk_stackframe+0xa2/0x11a\\n[    0.000000] [\u003cffffffff80c49c80\u003e] dump_stack_lvl+0x22/0x36\\n[    0.000000] [\u003cffffffff80c3783e\u003e] print_report+0x198/0x4a8\\n[    0.000000] [\u003cffffffff80099ecc\u003e] init_param_lock+0x26/0x2a\\n[    0.000000] [\u003cffffffff80007c4a\u003e] walk_stackframe+0xa2/0x11a\\n[    0.000000] [\u003cffffffff8015f68a\u003e] kasan_report+0x9a/0xc8\\n[    0.000000] [\u003cffffffff80007c4a\u003e] walk_stackframe+0xa2/0x11a\\n[    0.000000] [\u003cffffffff80007c4a\u003e] walk_stackframe+0xa2/0x11a\\n[    0.000000] [\u003cffffffff8006e99c\u003e] desc_make_final+0x80/0x84\\n[    0.000000] [\u003cffffffff8009a04e\u003e] stack_trace_save+0x88/0xa6\\n[    0.000000] [\u003cffffffff80099fc2\u003e] filter_irq_stacks+0x72/0x76\\n[    0.000000] [\u003cffffffff8006b95e\u003e] devkmsg_read+0x32a/0x32e\\n[    0.000000] [\u003cffffffff8015ec16\u003e] kasan_save_stack+0x28/0x52\\n[    0.000000] [\u003cffffffff8006e998\u003e] desc_make_final+0x7c/0x84\\n[    0.000000] [\u003cffffffff8009a04a\u003e] stack_trace_save+0x84/0xa6\\n[    0.000000] [\u003cffffffff8015ec52\u003e] kasan_set_track+0x12/0x20\\n[    0.000000] [\u003cffffffff8015f22e\u003e] __kasan_slab_alloc+0x58/0x5e\\n[    0.000000] [\u003cffffffff8015e7ea\u003e] __kmem_cache_create+0x21e/0x39a\\n[    0.000000] [\u003cffffffff80e133ac\u003e] create_boot_cache+0x70/0x9c\\n[    0.000000] [\u003cffffffff80e17ab2\u003e] kmem_cache_init+0x6c/0x11e\\n[    0.000000] [\u003cffffffff80e00fd6\u003e] mm_init+0xd8/0xfe\\n[    0.000000] [\u003cffffffff80e011d8\u003e] start_kernel+0x190/0x3ca\\n[    0.000000]\\n[    0.000000] The buggy address belongs to stack of task swapper/0\\n[    0.000000]  and is located at offset 0 in frame:\\n[    0.000000]  stack_trace_save+0x0/0xa6\\n[    0.000000]\\n[    0.000000] This frame has 1 object:\\n[    0.000000]  [32, 56) \u0027c\u0027\\n[    0.000000]\\n[    0.000000] The buggy address belongs to the physical page:\\n[    0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07\\n[    0.000000] flags: 0x1000(reserved|zone=0)\\n[    0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000\\n[    0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff\\n[    0.000000] page dumped because: kasan: bad access detected\\n[    0.000000]\\n[    0.000000] Memory state around the buggy address:\\n[    0.000000]  ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\\n[    0.000000]  ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\\n[    0.000000] \u003effffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3\\n[    0.000000]                                            ^\\n[    0.000000]  ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00\\n[    0.000000]  ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00\\n[    0.000000] ==================================================================\\n\\nFix that by using READ_ONCE_NOCHECK when reading the stack in imprecise\\nmode.\"},{\"lang\":\"es\",\"value\":\"En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: riscv: Usar READ_ONCE_NOCHECK en modo de desenrollado de pila impreciso Cuando no se establece CONFIG_FRAME_POINTER, la funci\u00f3n de desenrollado de pila walk_stackframe lee la pila aleatoriamente y luego, cuando KASAN est\u00e1 habilitado, puede llevar al siguiente backtrace: [ 0.000000] ===================================================================== [ 0.000000] ERROR: KASAN: pila fuera de los l\u00edmites en walk_stackframe+0xa6/0x11a [ 0.000000] Lectura de tama\u00f1o 8 en la direcci\u00f3n ffffffff81807c40 por tarea swapper/0 [ 0.000000] [ 0.000000] CPU: 0 PID: 0 Comm: swapper No contaminado 6.2.0-12919-g24203e6db61f #43 [ 0.000000] Nombre del hardware: riscv-virtio,qemu (DT) [ 0.000000] Rastreo de llamadas: [ 0.000000] [] walk_stackframe+0x0/0x11a [ 0.000000] [] init_param_lock+0x26/0x2a [ 0.000000] [] walk_stackframe+0xa2/0x11a [ 0.000000] [] dump_stack_lvl+0x22/0x36 [ 0.000000] [] print_report+0x198/0x4a8 [ 0.000000] [] init_param_lock+0x26/0x2a [ 0.000000] [] walk_stackframe+0xa2/0x11a [ 0.000000] [] kasan_report+0x9a/0xc8 [ 0.000000] [] walk_stackframe+0xa2/0x11a [ 0.000000] [] walk_stackframe+0xa2/0x11a [ 0.000000] [] desc_make_final+0x80/0x84 [ 0.000000] [] stack_trace_save+0x88/0xa6 [ 0.000000] [] filter_irq_stacks+0x72/0x76 [ 0.000000] [] devkmsg_read+0x32a/0x32e [ 0.000000] [] kasan_save_stack+0x28/0x52 [ 0.000000] [] desc_make_final+0x7c/0x84 [ 0.000000] [] stack_trace_save+0x84/0xa6 [ 0.000000] [] kasan_set_track+0x12/0x20 [ 0.000000] [] __kasan_slab_alloc+0x58/0x5e [ 0.000000] [] __kmem_cache_create+0x21e/0x39a [ 0.000000] [] create_boot_cache+0x70/0x9c [ 0.000000] [] kmem_cache_init+0x6c/0x11e [ 0.000000] [] mm_init+0xd8/0xfe [ 0.000000] [] start_kernel+0x190/0x3ca [ 0.000000] [ 0.000000] The buggy address belongs to stack of task swapper/0 [ 0.000000] and is located at offset 0 in frame: [ 0.000000] stack_trace_save+0x0/0xa6 [ 0.000000] [ 0.000000] This frame has 1 object: [ 0.000000] [32, 56) \u0027c\u0027 [ 0.000000] [ 0.000000] The buggy address belongs to the physical page: [ 0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07 [ 0.000000] flags: 0x1000(reserved|zone=0) [ 0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000 [ 0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff [ 0.000000] page dumped because: kasan: bad access detected [ 0.000000] [ 0.000000] Memory state around the buggy address: [ 0.000000] ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] \u0026gt;ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3 [ 0.000000] ^ [ 0.000000] ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 0.000000] ================================================================== Solucione esto usando READ_ONCE_NOCHECK al leer la pila en modo impreciso.\"}],\"metrics\":{},\"references\":[{\"url\":\"https://git.kernel.org/stable/c/17fa90ffba20743c946920fbb0afe160d0ead8c9\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/324912d6c0c4006711054d389faa2239c1655e1e\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/3a9418d2c93c1c86ce4d0595112d91c7a8e70c2c\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/3de277af481ab931fab9e295ad8762692920732a\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/76950340cf03b149412fe0d5f0810e52ac1df8cb\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"},{\"url\":\"https://git.kernel.org/stable/c/a99a61d9e1bfca2fc37d223a6a185c0eb66aba02\",\"source\":\"416baaa9-dc9f-4396-8d5f-8c081fb06d67\"}]}}"
  }
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.


Loading…

Loading…