fkie_cve-2024-26756
Vulnerability from fkie_nvd
Published
2024-04-03 17:15
Modified
2025-03-17 16:56
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved:
md: Don't register sync_thread for reshape directly
Currently, if reshape is interrupted, then reassemble the array will
register sync_thread directly from pers->run(), in this case
'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee
that md_do_sync() will be executed, hence stop_sync_thread() will hang
because 'MD_RECOVERY_RUNNING' can't be cleared.
Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE,
however, following hang can still be triggered by dm-raid test
shell/lvconvert-raid-reshape.sh occasionally:
[root@fedora ~]# cat /proc/1982/stack
[<0>] stop_sync_thread+0x1ab/0x270 [md_mod]
[<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod]
[<0>] raid_presuspend+0x1e/0x70 [dm_raid]
[<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]
[<0>] __dm_destroy+0x2a5/0x310 [dm_mod]
[<0>] dm_destroy+0x16/0x30 [dm_mod]
[<0>] dev_remove+0x165/0x290 [dm_mod]
[<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod]
[<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod]
[<0>] vfs_ioctl+0x21/0x60
[<0>] __x64_sys_ioctl+0xb9/0xe0
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Meanwhile mddev->recovery is:
MD_RECOVERY_RUNNING |
MD_RECOVERY_INTR |
MD_RECOVERY_RESHAPE |
MD_RECOVERY_FROZEN
Fix this problem by remove the code to register sync_thread directly
from raid10 and raid5. And let md_check_recovery() to register
sync_thread.
References
Impacted products
Vendor | Product | Version | |
---|---|---|---|
linux | linux_kernel | * | |
linux | linux_kernel | 6.8 | |
linux | linux_kernel | 6.8 | |
linux | linux_kernel | 6.8 | |
linux | linux_kernel | 6.8 | |
linux | linux_kernel | 6.8 |
{ "configurations": [ { "nodes": [ { "cpeMatch": [ { "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "4B40F459-8AC4-4B7B-A429-8F308610CEBF", "versionEndExcluding": "6.7.7", "versionStartIncluding": "2.6.17", "vulnerable": true }, { "criteria": "cpe:2.3:o:linux:linux_kernel:6.8:rc1:*:*:*:*:*:*", "matchCriteriaId": "B9F4EA73-0894-400F-A490-3A397AB7A517", "vulnerable": true }, { "criteria": "cpe:2.3:o:linux:linux_kernel:6.8:rc2:*:*:*:*:*:*", "matchCriteriaId": "056BD938-0A27-4569-B391-30578B309EE3", "vulnerable": true }, { "criteria": "cpe:2.3:o:linux:linux_kernel:6.8:rc3:*:*:*:*:*:*", "matchCriteriaId": "F02056A5-B362-4370-9FF8-6F0BD384D520", "vulnerable": true }, { "criteria": "cpe:2.3:o:linux:linux_kernel:6.8:rc4:*:*:*:*:*:*", "matchCriteriaId": "62075ACE-B2A0-4B16-829D-B3DA5AE5CC41", "vulnerable": true }, { "criteria": "cpe:2.3:o:linux:linux_kernel:6.8:rc5:*:*:*:*:*:*", "matchCriteriaId": "A780F817-2A77-4130-A9B7-5C25606314E3", "vulnerable": true } ], "negate": false, "operator": "OR" } ] } ], "cveTags": [], "descriptions": [ { "lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmd: Don\u0027t register sync_thread for reshape directly\n\nCurrently, if reshape is interrupted, then reassemble the array will\nregister sync_thread directly from pers-\u003erun(), in this case\n\u0027MD_RECOVERY_RUNNING\u0027 is set directly, however, there is no guarantee\nthat md_do_sync() will be executed, hence stop_sync_thread() will hang\nbecause \u0027MD_RECOVERY_RUNNING\u0027 can\u0027t be cleared.\n\nLast patch make sure that md_do_sync() will set MD_RECOVERY_DONE,\nhowever, following hang can still be triggered by dm-raid test\nshell/lvconvert-raid-reshape.sh occasionally:\n\n[root@fedora ~]# cat /proc/1982/stack\n[\u003c0\u003e] stop_sync_thread+0x1ab/0x270 [md_mod]\n[\u003c0\u003e] md_frozen_sync_thread+0x5c/0xa0 [md_mod]\n[\u003c0\u003e] raid_presuspend+0x1e/0x70 [dm_raid]\n[\u003c0\u003e] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]\n[\u003c0\u003e] __dm_destroy+0x2a5/0x310 [dm_mod]\n[\u003c0\u003e] dm_destroy+0x16/0x30 [dm_mod]\n[\u003c0\u003e] dev_remove+0x165/0x290 [dm_mod]\n[\u003c0\u003e] ctl_ioctl+0x4bb/0x7b0 [dm_mod]\n[\u003c0\u003e] dm_ctl_ioctl+0x11/0x20 [dm_mod]\n[\u003c0\u003e] vfs_ioctl+0x21/0x60\n[\u003c0\u003e] __x64_sys_ioctl+0xb9/0xe0\n[\u003c0\u003e] do_syscall_64+0xc6/0x230\n[\u003c0\u003e] entry_SYSCALL_64_after_hwframe+0x6c/0x74\n\nMeanwhile mddev-\u003erecovery is:\nMD_RECOVERY_RUNNING |\nMD_RECOVERY_INTR |\nMD_RECOVERY_RESHAPE |\nMD_RECOVERY_FROZEN\n\nFix this problem by remove the code to register sync_thread directly\nfrom raid10 and raid5. And let md_check_recovery() to register\nsync_thread." }, { "lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: md: No registre sync_thread para remodelar directamente Actualmente, si se interrumpe el proceso de remodelaci\u00f3n, volver a ensamblar la matriz registrar\u00e1 sync_thread directamente desde pers-\u0026gt;run(), en este caso \u0027MD_RECOVERY_RUNNING \u0027 se configura directamente, sin embargo, no hay garant\u00eda de que md_do_sync() se ejecute, por lo tanto, stop_sync_thread() se bloquear\u00e1 porque \u0027MD_RECOVERY_RUNNING\u0027 no se puede borrar. En el \u00faltimo parche, aseg\u00farese de que md_do_sync() establezca MD_RECOVERY_DONE; sin embargo, dm-raid test shell/lvconvert-raid-reshape.sh ocasionalmente puede activar el siguiente bloqueo: [root@fedora ~]# cat /proc/1982/stack [\u0026lt;0\u0026gt;] stop_sync_thread+0x1ab/0x270 [md_mod] [\u0026lt;0\u0026gt;] md_frozen_sync_thread+0x5c/0xa0 [md_mod] [\u0026lt;0\u0026gt;] raid_presuspend+0x1e/0x70 [dm_raid] [\u0026lt;0\u0026gt;] dm_table_presuspend_targets+0x40/0xb0 [ dm_mod] [\u0026lt;0\u0026gt;] __dm_destroy+0x2a5/0x310 [dm_mod] [\u0026lt;0\u0026gt;] dm_destroy+0x16/0x30 [dm_mod] [\u0026lt;0\u0026gt;] dev_remove+0x165/0x290 [dm_mod] [\u0026lt;0\u0026gt;] ctl_ioctl+0x4bb/ 0x7b0 [dm_mod] [\u0026lt;0\u0026gt;] dm_ctl_ioctl+0x11/0x20 [dm_mod] [\u0026lt;0\u0026gt;] vfs_ioctl+0x21/0x60 [\u0026lt;0\u0026gt;] __x64_sys_ioctl+0xb9/0xe0 [\u0026lt;0\u0026gt;] do_syscall_64+0xc6/0x230 [\u0026lt;0 \u0026gt;] Entry_SYSCALL_64_after_hwframe+0x6c/0x74 Mientras tanto mddev-\u0026gt;recovery es: MD_RECOVERY_RUNNING | MD_RECOVERY_INTR | MD_RECOVERY_RESHAPE | MD_RECOVERY_FROZEN Solucione este problema eliminando el c\u00f3digo para registrar sync_thread directamente desde raid10 y raid5. Y deje que md_check_recovery() registre sync_thread." } ], "id": "CVE-2024-26756", "lastModified": "2025-03-17T16:56:57.017", "metrics": { "cvssMetricV31": [ { "cvssData": { "attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1" }, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary" } ] }, "published": "2024-04-03T17:15:52.150", "references": [ { "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": [ "Patch" ], "url": "https://git.kernel.org/stable/c/13b520fb62b772e408f9b79c5fe18ad414e90417" }, { "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": [ "Patch" ], "url": "https://git.kernel.org/stable/c/ad39c08186f8a0f221337985036ba86731d6aafe" }, { "source": "af854a3a-2127-422b-91ae-364da2661108", "tags": [ "Patch" ], "url": "https://git.kernel.org/stable/c/13b520fb62b772e408f9b79c5fe18ad414e90417" }, { "source": "af854a3a-2127-422b-91ae-364da2661108", "tags": [ "Patch" ], "url": "https://git.kernel.org/stable/c/ad39c08186f8a0f221337985036ba86731d6aafe" } ], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [ { "description": [ { "lang": "en", "value": "CWE-459" } ], "source": "nvd@nist.gov", "type": "Primary" } ] }
Loading…
Loading…
Sightings
Author | Source | Type | Date |
---|
Nomenclature
- Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
- Confirmed: The vulnerability is confirmed from an analyst perspective.
- Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
- Patched: This vulnerability was successfully patched by the user reporting the sighting.
- Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
- Not confirmed: The user expresses doubt about the veracity of the vulnerability.
- Not patched: This vulnerability was not successfully patched by the user reporting the sighting.
Loading…
Loading…