fkie_cve-2025-22011
Vulnerability from fkie_nvd
Published
2025-04-08 09:15
Modified
2025-04-10 13:10
Summary
In the Linux kernel, the following vulnerability has been resolved: ARM: dts: bcm2711: Fix xHCI power-domain During s2idle tests on the Raspberry CM4 the VPU firmware always crashes on xHCI power-domain resume: root@raspberrypi:/sys/power# echo freeze > state [ 70.724347] xhci_suspend finished [ 70.727730] xhci_plat_suspend finished [ 70.755624] bcm2835-power bcm2835-power: Power grafx off [ 70.761127] USB: Set power to 0 [ 74.653040] USB: Failed to set power to 1 (-110) This seems to be caused because of the mixed usage of raspberrypi-power and bcm2835-power at the same time. So avoid the usage of the VPU firmware power-domain driver, which prevents the VPU crash.



{
  "configurations": [
    {
      "nodes": [
        {
          "cpeMatch": [
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "BF90340F-6FF6-4A1E-BAA7-7C640D39CCDD",
              "versionEndExcluding": "6.12.21",
              "versionStartIncluding": "6.8",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*",
              "matchCriteriaId": "FAECBE4D-58CF-4836-BBAB-5E28B800A778",
              "versionEndExcluding": "6.13.9",
              "versionStartIncluding": "6.13",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc1:*:*:*:*:*:*",
              "matchCriteriaId": "186716B6-2B66-4BD0-852E-D48E71C0C85F",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc2:*:*:*:*:*:*",
              "matchCriteriaId": "0D3E781C-403A-498F-9DA9-ECEE50F41E75",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc3:*:*:*:*:*:*",
              "matchCriteriaId": "66619FB8-0AAF-4166-B2CF-67B24143261D",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc4:*:*:*:*:*:*",
              "matchCriteriaId": "D3D6550E-6679-4560-902D-AF52DCFE905B",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc5:*:*:*:*:*:*",
              "matchCriteriaId": "45B90F6B-BEC7-4D4E-883A-9DBADE021750",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc6:*:*:*:*:*:*",
              "matchCriteriaId": "1759FFB7-531C-41B1-9AE1-FD3D80E0D920",
              "vulnerable": true
            },
            {
              "criteria": "cpe:2.3:o:linux:linux_kernel:6.14:rc7:*:*:*:*:*:*",
              "matchCriteriaId": "AD948719-8628-4421-A340-1066314BBD4A",
              "vulnerable": true
            }
          ],
          "negate": false,
          "operator": "OR"
        }
      ]
    }
  ],
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nARM: dts: bcm2711: Fix xHCI power-domain\n\nDuring s2idle tests on the Raspberry CM4 the VPU firmware always crashes\non xHCI power-domain resume:\n\nroot@raspberrypi:/sys/power# echo freeze \u003e state\n[   70.724347] xhci_suspend finished\n[   70.727730] xhci_plat_suspend finished\n[   70.755624] bcm2835-power bcm2835-power: Power grafx off\n[   70.761127]  USB: Set power to 0\n\n[   74.653040]  USB: Failed to set power to 1 (-110)\n\nThis seems to be caused because of the mixed usage of\nraspberrypi-power and bcm2835-power at the same time. So avoid\nthe usage of the VPU firmware power-domain driver, which\nprevents the VPU crash."
    },
    {
      "lang": "es",
      "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: ARM: dts: bcm2711: Reparar xHCI power-domain Durante las pruebas s2idle en Raspberry CM4, el firmware de la VPU siempre falla en xHCI power-domain resume: root@raspberrypi:/sys/power# echo freeze \u0026gt; state [ 70.724347] xhci_suspend finished [ 70.727730] xhci_plat_suspend finished [ 70.755624] bcm2835-power bcm2835-power: Apagar grafx [ 70.761127] USB: Establecer la energ\u00eda en 0 [ 74.653040] USB: No se pudo establecer la energ\u00eda en 1 (-110) Esto parece deberse al uso mixto de raspberrypi-power y bcm2835-power al mismo tiempo. Por lo tanto, evite el uso del controlador de dominio de energ\u00eda del firmware VPU, lo que evita el bloqueo de la VPU."
    }
  ],
  "id": "CVE-2025-22011",
  "lastModified": "2025-04-10T13:10:41.140",
  "metrics": {
    "cvssMetricV31": [
      {
        "cvssData": {
          "attackComplexity": "LOW",
          "attackVector": "LOCAL",
          "availabilityImpact": "HIGH",
          "baseScore": 5.5,
          "baseSeverity": "MEDIUM",
          "confidentialityImpact": "NONE",
          "integrityImpact": "NONE",
          "privilegesRequired": "LOW",
          "scope": "UNCHANGED",
          "userInteraction": "NONE",
          "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H",
          "version": "3.1"
        },
        "exploitabilityScore": 1.8,
        "impactScore": 3.6,
        "source": "nvd@nist.gov",
        "type": "Primary"
      }
    ]
  },
  "published": "2025-04-08T09:15:25.020",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/393947e06867923d4c2be380d46efd03407a8ce2"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/b8a47aa0b3df701d0fc41b3caf78d00571776be0"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "tags": [
        "Patch"
      ],
      "url": "https://git.kernel.org/stable/c/f44fa354a0715577ca32b085f6f60bcf32c748dd"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Analyzed",
  "weaknesses": [
    {
      "description": [
        {
          "lang": "en",
          "value": "NVD-CWE-noinfo"
        }
      ],
      "source": "nvd@nist.gov",
      "type": "Primary"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.


Loading…

Loading…