fkie_cve-2025-38040
Vulnerability from fkie_nvd
Published
2025-06-18 10:15
Modified
2025-06-18 13:46
Severity ?
Summary
In the Linux kernel, the following vulnerability has been resolved: serial: mctrl_gpio: split disable_ms into sync and no_sync APIs The following splat has been observed on a SAMA5D27 platform using atmel_serial: BUG: sleeping function called from invalid context at kernel/irq/manage.c:738 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0 preempt_count: 1, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<00000000>] 0x0 hardirqs last disabled at (0): [<c01588f0>] copy_process+0x1c4c/0x7bec softirqs last enabled at (0): [<c0158944>] copy_process+0x1ca0/0x7bec softirqs last disabled at (0): [<00000000>] 0x0 CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74 Hardware name: Atmel SAMA5 Workqueue: hci0 hci_power_on [bluetooth] Call trace: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x44/0x70 dump_stack_lvl from __might_resched+0x38c/0x598 __might_resched from disable_irq+0x1c/0x48 disable_irq from mctrl_gpio_disable_ms+0x74/0xc0 mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4 atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8 atmel_set_termios from uart_change_line_settings+0x15c/0x994 uart_change_line_settings from uart_set_termios+0x2b0/0x668 uart_set_termios from tty_set_termios+0x600/0x8ec tty_set_termios from ttyport_set_flow_control+0x188/0x1e0 ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc] wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth] hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth] hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth] hci_power_on [bluetooth] from process_one_work+0x998/0x1a38 process_one_work from worker_thread+0x6e0/0xfb4 worker_thread from kthread+0x3d4/0x484 kthread from ret_from_fork+0x14/0x28 This warning is emitted when trying to toggle, at the highest level, some flow control (with serdev_device_set_flow_control) in a device driver. At the lowest level, the atmel_serial driver is using serial_mctrl_gpio lib to enable/disable the corresponding IRQs accordingly. The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to disable_irq (called in mctrl_gpio_disable_ms) being possibly called in some atomic context (some tty drivers perform modem lines configuration in regions protected by port lock). Split mctrl_gpio_disable_ms into two differents APIs, a non-blocking one and a blocking one. Replace mctrl_gpio_disable_ms calls with the relevant version depending on whether the call is protected by some port lock.
Impacted products
Vendor Product Version



{
  "cveTags": [],
  "descriptions": [
    {
      "lang": "en",
      "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nserial: mctrl_gpio: split disable_ms into sync and no_sync APIs\n\nThe following splat has been observed on a SAMA5D27 platform using\natmel_serial:\n\nBUG: sleeping function called from invalid context at kernel/irq/manage.c:738\nin_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0\npreempt_count: 1, expected: 0\nINFO: lockdep is turned off.\nirq event stamp: 0\nhardirqs last  enabled at (0): [\u003c00000000\u003e] 0x0\nhardirqs last disabled at (0): [\u003cc01588f0\u003e] copy_process+0x1c4c/0x7bec\nsoftirqs last  enabled at (0): [\u003cc0158944\u003e] copy_process+0x1ca0/0x7bec\nsoftirqs last disabled at (0): [\u003c00000000\u003e] 0x0\nCPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 Not tainted 6.13.0-rc7+ #74\nHardware name: Atmel SAMA5\nWorkqueue: hci0 hci_power_on [bluetooth]\nCall trace:\n  unwind_backtrace from show_stack+0x18/0x1c\n  show_stack from dump_stack_lvl+0x44/0x70\n  dump_stack_lvl from __might_resched+0x38c/0x598\n  __might_resched from disable_irq+0x1c/0x48\n  disable_irq from mctrl_gpio_disable_ms+0x74/0xc0\n  mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4\n  atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8\n  atmel_set_termios from uart_change_line_settings+0x15c/0x994\n  uart_change_line_settings from uart_set_termios+0x2b0/0x668\n  uart_set_termios from tty_set_termios+0x600/0x8ec\n  tty_set_termios from ttyport_set_flow_control+0x188/0x1e0\n  ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc]\n  wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth]\n  hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth]\n  hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth]\n  hci_power_on [bluetooth] from process_one_work+0x998/0x1a38\n  process_one_work from worker_thread+0x6e0/0xfb4\n  worker_thread from kthread+0x3d4/0x484\n  kthread from ret_from_fork+0x14/0x28\n\nThis warning is emitted when trying to toggle, at the highest level,\nsome flow control (with serdev_device_set_flow_control) in a device\ndriver. At the lowest level, the atmel_serial driver is using\nserial_mctrl_gpio lib to enable/disable the corresponding IRQs\naccordingly.  The warning emitted by CONFIG_DEBUG_ATOMIC_SLEEP is due to\ndisable_irq (called in mctrl_gpio_disable_ms) being possibly called in\nsome atomic context (some tty drivers perform modem lines configuration\nin regions protected by port lock).\n\nSplit mctrl_gpio_disable_ms into two differents APIs, a non-blocking one\nand a blocking one. Replace mctrl_gpio_disable_ms calls with the\nrelevant version depending on whether the call is protected by some port\nlock."
    },
    {
      "lang": "es",
      "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: serial: mctrl_gpio: divide disabled_ms en API sync y no_sync Se ha observado el siguiente splat en una plataforma SAMA5D27 usando atmel_serial: BUG: funci\u00f3n inactiva llamada desde un contexto no v\u00e1lido en kernel/irq/manage.c:738 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 27, name: kworker/u5:0 preempt_count: 1, expected: 0 INFO: lockdep est\u00e1 desactivado. Marca de evento irq: 0 hardirqs habilitados por \u00faltima vez en (0): [\u0026lt;00000000\u0026gt;] 0x0 hardirqs deshabilitados por \u00faltima vez en (0): [] copy_process+0x1c4c/0x7bec softirqs habilitados por \u00faltima vez en (0): [] copy_process+0x1ca0/0x7bec softirqs deshabilitados por \u00faltima vez en (0): [\u0026lt;00000000\u0026gt;] 0x0 CPU: 0 UID: 0 PID: 27 Comm: kworker/u5:0 No contaminado 6.13.0-rc7+ #74 Nombre del hardware: Atmel SAMA5 Cola de trabajo: hci0 hci_power_on [bluetooth] Rastreo de llamadas: unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x44/0x70 dump_stack_lvl from __might_resched+0x38c/0x598 __might_resched from disable_irq+0x1c/0x48 disable_irq from mctrl_gpio_disable_ms+0x74/0xc0 mctrl_gpio_disable_ms from atmel_disable_ms.part.0+0x80/0x1f4 atmel_disable_ms.part.0 from atmel_set_termios+0x764/0x11e8 atmel_set_termios from uart_change_line_settings+0x15c/0x994 uart_change_line_settings from uart_set_termios+0x2b0/0x668 uart_set_termios from tty_set_termios+0x600/0x8ec tty_set_termios from ttyport_set_flow_control+0x188/0x1e0 ttyport_set_flow_control from wilc_setup+0xd0/0x524 [hci_wilc] wilc_setup [hci_wilc] from hci_dev_open_sync+0x330/0x203c [bluetooth] hci_dev_open_sync [bluetooth] from hci_dev_do_open+0x40/0xb0 [bluetooth] hci_dev_do_open [bluetooth] from hci_power_on+0x12c/0x664 [bluetooth] hci_power_on [bluetooth] from process_one_work+0x998/0x1a38 process_one_work from worker_thread+0x6e0/0xfb4 worker_thread from kthread+0x3d4/0x484 kthread from ret_from_fork+0x14/0x28 Esta advertencia se emite al intentar alternar, en el nivel m\u00e1s alto, alg\u00fan control de flujo (con serdev_device_set_flow_control) en un controlador de dispositivo. En el nivel m\u00e1s bajo, el controlador atmel_serial est\u00e1 usando la librer\u00eda serial_mctrl_gpio para habilitar/deshabilitar las IRQ correspondientes seg\u00fan corresponda. La advertencia emitida por CONFIG_DEBUG_ATOMIC_SLEEP se debe a que la funci\u00f3n disabled_irq (llamada en mctrl_gpio_disable_ms) posiblemente se llama en alg\u00fan contexto at\u00f3mico (algunos controladores tty realizan la configuraci\u00f3n de l\u00edneas de m\u00f3dem en regiones protegidas por bloqueo de puerto). Divida mctrl_gpio_disable_ms en dos API diferentes, una sin bloqueo y otra con bloqueo. Reemplace las llamadas a mctrl_gpio_disable_ms con la versi\u00f3n relevante dependiendo de si la llamada est\u00e1 protegida por alg\u00fan bloqueo de puerto."
    }
  ],
  "id": "CVE-2025-38040",
  "lastModified": "2025-06-18T13:46:52.973",
  "metrics": {},
  "published": "2025-06-18T10:15:36.400",
  "references": [
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/1bd2aad57da95f7f2d2bb52f7ad15c0f4993a685"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/68435c1fa3db696db4f480385db9e50e26691d0d"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/7187ec6b0b9ff22ebac2c3bb4178b7dbbdc0a55a"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/c504c11b94d6e4ad818ca5578dffa8ff29ad0f20"
    },
    {
      "source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
      "url": "https://git.kernel.org/stable/c/e6a46719a2369eb5186d4f7e6c0478720ca1ec3d"
    }
  ],
  "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67",
  "vulnStatus": "Awaiting Analysis"
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.


Loading…

Loading…