cisco-sa-voip-phone-csrf-k56vxvvx
Vulnerability from csaf_cisco
Published
2022-04-06 16:00
Modified
2022-10-28 14:20
Summary
Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware Cross-Site Request Forgery Vulnerability

Notes

Summary
A vulnerability in the web-based management interface of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of the web-based interface of an affected system. This vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform configuration changes on the affected device, resulting in a denial of service (DoS) condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
Vulnerable Products
At the time of publication, this vulnerability affected the following Cisco products if they were running a vulnerable release of Multiplatform Firmware: IP Phone 6800 Series with Multiplatform Firmware IP Phone 7800 Series with Multiplatform Firmware IP Phone 8800 Series with Multiplatform Firmware For information about which Cisco software releases were vulnerable at the time of publication, see the Fixed Software ["#fs"] section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products ["#vp"] section of this advisory are known to be affected by this vulnerability.
Workarounds
There are no workarounds that address this vulnerability.
Fixed Software
When considering software upgrades ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page ["https://www.cisco.com/go/psirt"], to determine exposure and a complete upgrade solution. In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers. Fixed Releases At the time of publication, the release information in the following table(s) was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information. The left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerability described in this advisory and which release included the fix for this vulnerability. Multiplatform Firmware Release First Fixed Release 11.3.5 and earlier 11.3.6 To download the firmware from the Software Center ["https://software.cisco.com/download/home"] on Cisco.com, do the following: Click Browse all. Choose Collaboration Endpoints > IP Phones > IP Phones with Multiplatform Firmware. Choose a specific series from the right pane of the product selector. Choose a specific product from the right pane of the product selector. If applicable, select a software type from the options provided. Choose a release from the left pane of the product page. The Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.
Vulnerability Policy
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy ["https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
Exploitation and Public Announcements
The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
Source
This vulnerability was found during internal security testing.
Legal Disclaimer
THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME. A standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.



{
  "document": {
    "acknowledgments": [
      {
        "summary": "This vulnerability was found during internal security testing."
      }
    ],
    "category": "csaf_security_advisory",
    "csaf_version": "2.0",
    "notes": [
      {
        "category": "summary",
        "text": "A vulnerability in the web-based management interface of Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of the web-based interface of an affected system.\r\n\r\nThis vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the interface to follow a crafted link. A successful exploit could allow the attacker to perform configuration changes on the affected device, resulting in a denial of service (DoS) condition.\r\n\r\nCisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.\r\n\r\n",
        "title": "Summary"
      },
      {
        "category": "general",
        "text": "At the time of publication, this vulnerability affected the following Cisco products if they were running a vulnerable release of Multiplatform Firmware:\r\n\r\nIP Phone 6800 Series with Multiplatform Firmware\r\nIP Phone 7800 Series with Multiplatform Firmware\r\nIP Phone 8800 Series with Multiplatform Firmware\r\n\r\nFor information about which Cisco software releases were vulnerable at the time of publication, see the Fixed Software [\"#fs\"] section of this advisory. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.",
        "title": "Vulnerable Products"
      },
      {
        "category": "general",
        "text": "Only products listed in the Vulnerable Products [\"#vp\"] section of this advisory are known to be affected by this vulnerability.",
        "title": "Products Confirmed Not Vulnerable"
      },
      {
        "category": "general",
        "text": "There are no workarounds that address this vulnerability.",
        "title": "Workarounds"
      },
      {
        "category": "general",
        "text": "When considering software upgrades [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes\"], customers are advised to regularly consult the advisories for Cisco products, which are available from the Cisco Security Advisories page [\"https://www.cisco.com/go/psirt\"], to determine exposure and a complete upgrade solution.\r\n\r\nIn all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.\r\n      Fixed Releases\r\nAt the time of publication, the release information in the following table(s) was accurate. See the Details section in the bug ID(s) at the top of this advisory for the most complete and current information.\r\n\r\nThe left column lists Cisco software releases, and the right column indicates whether a release was affected by the vulnerability described in this advisory and which release included the fix for this vulnerability.\r\n        Multiplatform Firmware Release  First Fixed Release          11.3.5 and earlier  11.3.6\r\nTo download the firmware from the Software Center [\"https://software.cisco.com/download/home\"] on Cisco.com, do the following:\r\n\r\nClick Browse all.\r\nChoose Collaboration Endpoints \u003e IP Phones \u003e IP Phones with Multiplatform Firmware.\r\nChoose a specific series from the right pane of the product selector.\r\nChoose a specific product from the right pane of the product selector.\r\nIf applicable, select a software type from the options provided.\r\nChoose a release from the left pane of the product page.\r\n\r\nThe Cisco Product Security Incident Response Team (PSIRT) validates only the affected and fixed release information that is documented in this advisory.",
        "title": "Fixed Software"
      },
      {
        "category": "general",
        "text": "To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy [\"https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html\"]. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.",
        "title": "Vulnerability Policy"
      },
      {
        "category": "general",
        "text": "The Cisco PSIRT is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.",
        "title": "Exploitation and Public Announcements"
      },
      {
        "category": "general",
        "text": "This vulnerability was found during internal security testing.",
        "title": "Source"
      },
      {
        "category": "legal_disclaimer",
        "text": "THIS DOCUMENT IS PROVIDED ON AN \"AS IS\" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE OR WARRANTY, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.\r\n\r\nA standalone copy or paraphrase of the text of this document that omits the distribution URL is an uncontrolled copy and may lack important information or contain factual errors. The information in this document is intended for end users of Cisco products.",
        "title": "Legal Disclaimer"
      }
    ],
    "publisher": {
      "category": "vendor",
      "contact_details": "psirt@cisco.com",
      "issuing_authority": "Cisco PSIRT",
      "name": "Cisco",
      "namespace": "https://wwww.cisco.com"
    },
    "references": [
      {
        "category": "self",
        "summary": "Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware Cross-Site Request Forgery Vulnerability",
        "url": "https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-voip-phone-csrf-K56vXvVx"
      },
      {
        "category": "external",
        "summary": "Cisco Security Vulnerability Policy",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html"
      },
      {
        "category": "external",
        "summary": "considering software upgrades",
        "url": "https://sec.cloudapps.cisco.com/security/center/resources/security_vulnerability_policy.html#fixes"
      },
      {
        "category": "external",
        "summary": "Cisco\u0026nbsp;Security Advisories page",
        "url": "https://www.cisco.com/go/psirt"
      },
      {
        "category": "external",
        "summary": "Software Center",
        "url": "https://software.cisco.com/download/home"
      }
    ],
    "title": "Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware Cross-Site Request Forgery Vulnerability",
    "tracking": {
      "current_release_date": "2022-10-28T14:20:37+00:00",
      "generator": {
        "date": "2024-05-10T23:13:37+00:00",
        "engine": {
          "name": "TVCE"
        }
      },
      "id": "cisco-sa-voip-phone-csrf-K56vXvVx",
      "initial_release_date": "2022-04-06T16:00:00+00:00",
      "revision_history": [
        {
          "date": "2022-04-06T15:57:13+00:00",
          "number": "1.0.0",
          "summary": "Initial public release."
        },
        {
          "date": "2022-06-01T17:12:33+00:00",
          "number": "1.1.0",
          "summary": "Updated Fixed Software Section"
        },
        {
          "date": "2022-10-28T14:20:37+00:00",
          "number": "1.2.0",
          "summary": "Corrected CVSS score."
        }
      ],
      "status": "final",
      "version": "1.2.0"
    }
  },
  "product_tree": {
    "branches": [
      {
        "branches": [
          {
            "category": "product_family",
            "name": "Cisco IP Phone 7800 Series with Multiplatform Firmware",
            "product": {
              "name": "Cisco IP Phone 7800 Series with Multiplatform Firmware ",
              "product_id": "CSAFPID-235374"
            }
          },
          {
            "category": "product_family",
            "name": "Cisco IP Phone 6800 Series with Multiplatform Firmware",
            "product": {
              "name": "Cisco IP Phone 6800 Series with Multiplatform Firmware ",
              "product_id": "CSAFPID-238623"
            }
          },
          {
            "category": "product_family",
            "name": "Cisco IP Phone 8800 Series with Multiplatform Firmware",
            "product": {
              "name": "Cisco IP Phone 8800 Series with Multiplatform Firmware ",
              "product_id": "CSAFPID-238624"
            }
          },
          {
            "category": "product_family",
            "name": "Cisco IP Phones with Multiplatform Firmware",
            "product": {
              "name": "Cisco IP Phones with Multiplatform Firmware ",
              "product_id": "CSAFPID-277607"
            }
          }
        ],
        "category": "vendor",
        "name": "Cisco"
      }
    ]
  },
  "vulnerabilities": [
    {
      "cve": "CVE-2022-20774",
      "ids": [
        {
          "system_name": "Cisco Bug ID",
          "text": "CSCvz56447"
        }
      ],
      "notes": [
        {
          "category": "other",
          "text": "Complete.",
          "title": "Affected Product Comprehensiveness"
        }
      ],
      "product_status": {
        "known_affected": [
          "CSAFPID-238623",
          "CSAFPID-235374",
          "CSAFPID-238624",
          "CSAFPID-277607"
        ]
      },
      "remediations": [
        {
          "category": "vendor_fix",
          "details": "Cisco has released software updates that address this vulnerability.",
          "product_ids": [
            "CSAFPID-238623",
            "CSAFPID-277607",
            "CSAFPID-238624",
            "CSAFPID-235374"
          ],
          "url": "https://software.cisco.com"
        }
      ],
      "scores": [
        {
          "cvss_v3": {
            "baseScore": 6.8,
            "baseSeverity": "MEDIUM",
            "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:H/A:H",
            "version": "3.1"
          },
          "products": [
            "CSAFPID-238623",
            "CSAFPID-235374",
            "CSAFPID-238624",
            "CSAFPID-277607"
          ]
        }
      ],
      "title": "Cisco IP Phone 6800, 7800, and 8800 Series with Multiplatform Firmware  Cross-Site Request Forgery Vulnerability"
    }
  ]
}


Log in or create an account to share your comment.




Tags
Taxonomy of the tags.


Loading…

Loading…

Loading…

Sightings

Author Source Type Date

Nomenclature

  • Seen: The vulnerability was mentioned, discussed, or seen somewhere by the user.
  • Confirmed: The vulnerability is confirmed from an analyst perspective.
  • Exploited: This vulnerability was exploited and seen by the user reporting the sighting.
  • Patched: This vulnerability was successfully patched by the user reporting the sighting.
  • Not exploited: This vulnerability was not exploited or seen by the user reporting the sighting.
  • Not confirmed: The user expresses doubt about the veracity of the vulnerability.
  • Not patched: This vulnerability was not successfully patched by the user reporting the sighting.


Loading…

Loading…